1. Check whether the temperature self-control of the bubble film machine is intact, the heating device is not intact, and whether the temperature of each point is in the range of indicators to ensure the normal operation of the machine.

2. The products produced by bubble film machine have the characteristics of moisture-proof, shock-proof and sound-proof, beautiful appearance, insect-proof, mildew-proof and low price. Therefore, when feeding hopper, it is necessary to ensure clean, strictly prevent metal debris, sand and small tools from entering the outlet, in order to prevent damage to the barrel and screw. If abnormal noise is found in operation, it should stop processing immediately.

3. Regular maintenance should be carried out. The bubble film machine should be thoroughly cleaned every three months and the lubricating grease should be replaced every three months for various bearings.

4. Before starting the machine, the temperature of each temperature zone must be raised to the specified requirements according to the process requirements, and the machine can start only after holding for more than 30 minutes. It is strictly forbidden to start the machine before the temperature does not meet the requirements, so as to avoid damaging the bubble film machine.

5. Observe whether the thickness of the film is uniform and whether the diameter of the folded film meets the standard. If not, it needs to be replaced.

The structure of the bubble film machine is scientific and reasonable, the shape is beautiful and generous, the performance is stable and reliable, and the operation is simple and easy to understand.